Research TT PSU Power Supply
The new TT-PSU housed in our new style case has a new anti vibration circuit, output circuit protection and improved power supply regulation. Offering the convenience of electronic speed change and reduced motor noise and increased stability for all Rega 24v motor turntables.
The TT- PSU is an ideal upgrade path for the RP3 or the RP1 (RP1 when fitted with the 24v motor upgrade kit).
Important: The TT PSU can only be used with the RP1, RP3, P3-24, RP6, P5 and P7 turntables. It is not compatible with any other Rega or manufacturers turntables.
The all new TT PSU and motor anti-vibration circuit is a combination of the innovative P9 power supply along with an improved P25 anti-vibration motor drive feeding the P9 24V AC synchronous motor. The TT PSU uses a remote "wall wart" transformer therefore keeping the sources of hum & noise well away from sensitive parts such as the cartridge and phono leads.
compact TT PSU uses exactly the same high stability crystal locked low
distortion sine wave generator as is used in the heart of the P9 power
supply. This, along with an efficient drive amplifier fed from stabilised
DC power supply, generates a 24Volt AC balanced signal of less than 0.05%
distortion, which is completely unaffected by any changes in the mains/line
voltage and conditions. This then drives the turntables anti-vibration
circuit, which is situated beneath the turntable.
The drive voltage for the motor is run
along the power lead to the turntable motor, which also carries the
33/45-RPM DC relay control voltage used to activate the anti-vibration