Linn Pekin Tuner


Linn Pekin Tuner (Left)



Linn Pekin Tuner (Top)

Detailed Image


The Linn Pekin AM/FM tuner integrates the knowledge gained from developing other Linn tuners such as the Kremlin, the Kudos and most recently the Classik, and takes it a step further, to produce a powerful and truly musical performance to the unique standard of pitch that you expect from Linn.

The extremely high performance and sound quality that characterises the Pekin is matched by its ease of operation and use. The Pekin can be manually controlled using the front panel, which gives clear information, and although there are many sophisticated features, the most commonly used require only one or two key presses. Alternatively, for ease of use the Pekin is supplied with a remote control handset, which provides access to all of the functions available from the front panel.

$1,100.00









Specifications:

Introduced:
2000

Dimensions:
H80mm x W320mm x D325mm

Weight:
2kg

Power Consumption:
7W typical

2 Main Supply Fuses:
100-240VAC T800mA

Main Supply:
Nominal Voltage ± 10%

Tuning Range:
USA: FM 87.5 to 108.5MHz; AM 530 to 1730kHz
Japan: FM 76.0 to 108.0MHz; AM 522 to 1629kHz
Europe: FM 87.5 to 108.5MHz; AM 522 to 1611kHz

Tuning Resolution:
FM TUNE mode: 50kHz
FM SCAN mode: 50kHz
AM TUNE mode: 1kHz
AM SCAN mode: 10kHz USA, 9kHz Europe and Japan

Presets:
80 user definable presets

Signal Strength:
0 to 50 scale

Mute Threshold:
1 to 50 scale

Audio Outputs:
Dual left/right RCA connectors

Line Level:
0.0dBv

Output Impedance:
300 Ohms

Minimum load on outputs:
5k Ohms

Knekt Interface:
Remote In/Out RCA connectors
RC5 communications protocol

RS232 Interface:
Optional RS232 communications board


Features
:

  • Manual, automatic scan or pre-set tuning with 80 memory pre-sets
  • Software upgradeable to incorporate future developments
  • User-programmable functions to enable user to customise the product
  • Fully screened low-noise circuitry to avoid interference
  • High overload margin and high sensitivity for clean capture of faint signals in crowded airwaves
  • Wide range, accurate signal strength meter and adjustable mute/scan threshold to allow tuner and aerial settings to be matched to local reception conditions and stored in memory
  • Two audio outputs for primary system and distributed sound
  • Electrical Remote Control socket for remote switch-on of other Linn products and direct connection of Knekt multi-room equipment
  • Universal input, low noise switchmode power supply giving high immunity to mains supply noise and disturbances
  • Fully remote-controllable (handset supplied)
 
Untitled Document

audio | home theater | accessories | product lines | used gear | contact us
about overture audio | home

 
Overture Audio
618 South Main Street
Ann Arbor, MI 48104
Phone: 734-662-1812